Celebrating Over 30 Years of Installing Seamless Gutters !!  Celebrating Over 30 Years of Installing Seamless Gutters !!

Thermal Gutter Expansion

In every summer and spring season, most homeowners report problems in their aluminum gutter installations due to unequal expansions. Here we are talking about the vertical tearing of gutter from its front face due to material related problems. You might be aware of the fact that aluminum contracts and expands due to temperature variations; however, the condition is not as bad as vinyl products. It is important to make sure that if you are installing gutters in a season with an environmental temperature below 30 degrees, the aluminum material is fully contracted, and the buckling problem will naturally arise during peak summer season. The experts at aluminum industry reveal that the gutter expansion problems are usually reported within 2 years after installation.

Prevent Expansion of Your Gutters

It is important to follow few guidelines to prevent expansion of gutters at your property. One need to make efforts for proper adjustments of the gutter machine and keep on organizing repetitive check for gutter adjustments. Note that, the gutter expansion problems are more prevalent in the sidewalk and driveway areas because they are more affected by the direct sunlight. Hence, it is important to be careful at the time of installation of Seamless Gutters in Houston and complete the process by putting additional stress on the gutter face.

You may need to be more careful if you are planning to use asphalt or concrete for installations. It is good to leave natural space for the gutter to let it normally expand after installation. Put a zip screw or pop rivet at the top portion of the gutter and attach it via hidden hanger at hook so that gutter face expansion can be prevented after installation. With this arrangement, you will be able to avoid the situation where the front portion of gutter grows out, and the back stays connected to the building.

Professionals have now developed expansion joints that are capable enough to bridge the two different sections of the gutter while letting them can move independently. In order to control the thermal gutter expansion problem, it is important to choose 50 ft practical length for aluminum gutters before the installation of expansion joints. The expansion joints possess two terminations in the gutter system that develops a dam to prevent the flow of water near the joint. Professionals at Seamless Gutter Company in Houston advise installing it at a high point on gutter so that water can flow away from the expansion joint instead of flowing through it.

 

Call Now!